346 MB
( 14:46)
Проверено 19:04

NetworkConnectLog - небольшая утилита, которая постоянно сканирует локальную сеть (с помощью ARP и Netbios протоколов) и добавляет новую строку в лог-файл при каждом подключении/отключении компьютера или другого устройства к/от сети. Строки с информацией о подключении/отключении от сети устройств легко экспортируются в файл comma-delimited/tab-delimited/html/xml для дальнейшей обработки.

Так было изначально на клиенте и работало двое суток, сегодня неожиданно перестало, само.. XXX 0. На других машинах клиентах точно такая же настройка работает. Я искал причину на клиенте думая что он не даёт подключиться к нему мастеру. На самом деле сработал фильтр [exim] fail2ban в жизь бы не подумал Отключил fail2ban - он всех разбанил включая IP машины клиента, и всё заработало.

Retele de calculatoare (LAN, MAN, WAN) - notiuni introductive:

Ever needed to connect two computers together without going through a wireless network? An easier way is to simply create a homegroup if you are running Windows 7 or higher. In order for this setup to work, there are a few things you need to make sure are setup or configured properly. I will try to go through all the different steps in this article. Usually, if you are using a crossover cable to connect two computers, the computers are not connected to a LAN network. In this case, you will need to configure static IP addresses for each computer. You have to make sure that both computers have IP addresses that are on the same subnet.

Wireless Network Watcher - Check whos Connected to your Wireless Network:

Now you just need to visit the website of your network adapter manufacturer and download the latest drivers for your network adapter. However, besides being time-consuming, this process carries the risk of getting the wrong driver installed, which may lead to serious malfunctions. The safer and easier way to update drivers on a Windows computer is by using an automatic tool such as TweakBit Driver Updater. This tool is approved by Microsoft and Norton Antivirus. After several tests, our team concluded that this is the best-automatized solution. Below you can find a quick guide on how to do it.

World of Tanks Blitz CZ - E-100 1vs4 komentovaný replay:

Network devices, or networking hardware, are physical devices that are required for communication and interaction between hardware on a computer network. Hubs connect multiple computer networking devices together. A hub also acts as a repeater in that it amplifies signals that deteriorate after traveling long distances over connecting cables. A hub is the simplest in the family of network connecting devices because it connects LAN components with identical protocols. A hub can be used with both digital and analog data, provided its settings have been configured to prepare for the formatting of the incoming data. For example, if the incoming data is in digital format, the hub must pass it on as packets; however, if the incoming data is analog, then the hub passes it on in signal form.

Рекомендуем ознакомиться: